[moodlight.git] / Makefile

# $Id: Makefile,v 1.1 2010/06/26 12:28:08 simimeie Exp $
# Makefile for HaWo Moodlight

CC	= avr-gcc
OBJDUMP	= avr-objdump
OBJCOPY	= avr-objcopy
#AVRDUDE	= avrdude
AVRDUDE	= /opt/avrdude-5.10/bin/avrdude
INCDIR	= .
# There are a few additional defines that en- or disable certain features,
# mainly to save space in case you are running out of flash.
# You can add them here.
#  -DJOKECMDS       Just some joke commands
ADDDEFS	= -DJOKECMDS

# target mcu (atmega328p or atmega168p)
MCU	= atmega328p
# Since avrdude is generally crappy software (I liked uisp a lot better, too
# bad the project is dead :-/), it cannot use the MCU name everybody else
# uses, it has to invent its own name for it. So this defines the same
# MCU as above, but with the name avrdude understands.
AVRDMCU	= m328p

# Some more settings
# Clock Frequency of the AVR. Needed for various calculations.
CPUFREQ		= 8000000UL
# desired baudrate of serial debug console
BAUDRATE	= 9600UL

SRCS	= console.c main.c
PROG	= moodlight

# compiler flags
CFLAGS	= -g -Os -Wall -Wno-pointer-sign -mmcu=$(MCU) $(ADDDEFS)

# linker flags
LDFLAGS = -g -mmcu=$(MCU) -Wl,-Map,$(PROG).map

CFLAGS += -DCPUFREQ=$(CPUFREQ) -DF_CPU=$(CPUFREQ) -DBAUDRATE=$(BAUDRATE)

OBJS	= $(SRCS:.c=.o)

all: compile dump text eeprom
	@echo -n "Compiled size: " && ls -l ${PROG}.bin

compile: $(OBJS)
	$(CC) $(LDFLAGS) -o $(PROG).elf $(OBJS)

dump: compile
	$(OBJDUMP) -h -S $(PROG).elf > $(PROG).lst

%o : %c 
	$(CC) $(CFLAGS) -I$(INCDIR) -c $< -o $@

# Create the flash contents
text: compile
	$(OBJCOPY) -j .text -j .data -O ihex $(PROG).elf $(PROG).hex
	$(OBJCOPY) -j .text -j .data -O srec $(PROG).elf $(PROG).srec
	$(OBJCOPY) -j .text -j .data -O binary $(PROG).elf $(PROG).bin

# Rules for building the .eeprom rom images
eeprom: compile
	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O ihex $(PROG).elf $(PROG)_eeprom.hex
	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O srec $(PROG).elf $(PROG)_eeprom.srec
	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O binary $(PROG).elf $(PROG)_eeprom.bin

clean:
	rm -f $(PROG) *~ *.elf *.rom *.bin *.eep *.o *.lst *.map *.srec *.hex

upload: uploadflash uploadeeprom

uploadflash:
	$(AVRDUDE) -c stk500v2 -p $(AVRDMCU) -P /dev/ttyS0 -U flash:w:$(PROG).srec:s

uploadeeprom:
	$(AVRDUDE) -c stk500v2 -p $(AVRDMCU) -P /dev/ttyS0 -U eeprom:w:$(PROG)_eeprom.srec:s
Commit	Line	Data
2d3643ee	1	# $Id: Makefile,v 1.1 2010/06/26 12:28:08 simimeie Exp $
	2	# Makefile for HaWo Moodlight
	3
	4	CC = avr-gcc
	5	OBJDUMP = avr-objdump
	6	OBJCOPY = avr-objcopy
	7	#AVRDUDE = avrdude
	8	AVRDUDE = /opt/avrdude-5.10/bin/avrdude
	9	INCDIR = .
	10	# There are a few additional defines that en- or disable certain features,
	11	# mainly to save space in case you are running out of flash.
	12	# You can add them here.
	13	# -DJOKECMDS Just some joke commands
	14	ADDDEFS = -DJOKECMDS
	15
	16	# target mcu (atmega328p or atmega168p)
	17	MCU = atmega328p
	18	# Since avrdude is generally crappy software (I liked uisp a lot better, too
	19	# bad the project is dead :-/), it cannot use the MCU name everybody else
	20	# uses, it has to invent its own name for it. So this defines the same
	21	# MCU as above, but with the name avrdude understands.
	22	AVRDMCU = m328p
	23
	24	# Some more settings
	25	# Clock Frequency of the AVR. Needed for various calculations.
	26	CPUFREQ = 8000000UL
	27	# desired baudrate of serial debug console
	28	BAUDRATE = 9600UL
	29
	30	SRCS = console.c main.c
	31	PROG = moodlight
	32
	33	# compiler flags
	34	CFLAGS = -g -Os -Wall -Wno-pointer-sign -mmcu=$(MCU) $(ADDDEFS)
	35
	36	# linker flags
	37	LDFLAGS = -g -mmcu=$(MCU) -Wl,-Map,$(PROG).map
	38
	39	CFLAGS += -DCPUFREQ=$(CPUFREQ) -DF_CPU=$(CPUFREQ) -DBAUDRATE=$(BAUDRATE)
	40
	41	OBJS = $(SRCS:.c=.o)
	42
	43	all: compile dump text eeprom
	44	@echo -n "Compiled size: " && ls -l ${PROG}.bin
	45
	46	compile: $(OBJS)
	47	$(CC) $(LDFLAGS) -o $(PROG).elf $(OBJS)
	48
	49	dump: compile
	50	$(OBJDUMP) -h -S $(PROG).elf > $(PROG).lst
	51
	52	%o : %c
	53	$(CC) $(CFLAGS) -I$(INCDIR) -c $< -o $@
	54
	55	# Create the flash contents
	56	text: compile
	57	$(OBJCOPY) -j .text -j .data -O ihex $(PROG).elf $(PROG).hex
	58	$(OBJCOPY) -j .text -j .data -O srec $(PROG).elf $(PROG).srec
	59	$(OBJCOPY) -j .text -j .data -O binary $(PROG).elf $(PROG).bin
	60
	61	# Rules for building the .eeprom rom images
	62	eeprom: compile
	63	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O ihex $(PROG).elf $(PROG)_eeprom.hex
	64	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O srec $(PROG).elf $(PROG)_eeprom.srec
65	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O binary $(PROG).elf $(PROG)_eeprom.bin
66
67	clean:
68	rm -f $(PROG) ~ .elf .rom .bin .eep .o .lst .map .srec .hex
69
70	upload: uploadflash uploadeeprom
71
72	uploadflash:
73	$(AVRDUDE) -c stk500v2 -p $(AVRDMCU) -P /dev/ttyS0 -U flash:w:$(PROG).srec:s
74
75	uploadeeprom:
76	$(AVRDUDE) -c stk500v2 -p $(AVRDMCU) -P /dev/ttyS0 -U eeprom:w:$(PROG)_eeprom.srec:s